> 4 inch Lift Kit - 2012-2018 Dodge Ram 1500 4WD Gas and Eco Diesel Models - with Superide Rear Shocks or Bilstein Front Struts and Rear Shocks
4 inch Lift Kit - 2012-2018 Dodge Ram 1500 4WD Gas and Eco Diesel Models - with Superide Rear Shocks or Bilstein Front Struts and Rear Shocks
Put me on the Waiting List
Add to Cart
Review this item
Add to Wish List
Add to Gift Registry
Email a friend
Superlift's complete knuckle style suspension lift kit for the 2012-2018 Dodge Ram 1500 4wd, providing 4” of lift height and a choice of rear
Superlift Superide shock absorbers
5100 Series Bilstein shock absorbers
Replacement knuckles yield best possible alignment specs. Front track width is not increased and factory turning radius is retained.
Front lower control arm crossmembers laser cut from 3/16" material.
Belly pan, constructed of 1/4" material, connects crossmembers and protects differential.
Front anti-sway bar link extensions retain factory "service for life" links.
New Superide Dual Rate rear coil springs provide ideal ride, handling and load carrying capability.
New bracketry relocates factory rear 4-link points, anti-sway bar links, brake lines and track bar.
New rear compression travel-stop brackets.
Rear shock options include
Superide Select (SS) by Bilstein
Installs easily with only slight trimming and no exhaust or driveshaft modifications.
Compatible with Dodge's Electronic Stability Program.
Limited Lifetime Warranty
NOTE: Will not fit Short Bed Standard Cab models due to rear driveline vibration.
DOES FIT ECO Diesel
NOTE: TRX/Outdoorman models may sit slightly low in the rear, Outdoorsman model trucks will achieve approximately 1" of additional front lift.
Superlift's 4" and 6" Ram lift kits received Chrysler's Design Award at the 2009 SEMA show, the automotive aftermarket industry's largest event. With our "best in class" lift, the Ram's "best in class" driveability remains intact, or arguably, it is improved upon. Lifted ride quality and control are exceptional.
On both lift heights, you have a choice of retaining the factory front strut cylinders, or purchasing Superide SS replacement strut cylinders by Bilstein, which noticeably improve handling at higher speeds. If the factory struts are retained, the lift kit includes Superide rear shocks; SS Bilstein rear shocks are included with the Bilstein SS lift.
With Superlift's replacement knuckle system, laser-cut bracketry relocates the front lower control arms and differential, and a .25" thick bellypan protects the vitals while further increasing overall rigidity. For the rear, new coil springs (not spacers) ensure proper functionality and ride quality.
NOTE: TRX4 and Outdoorsman Models - Both 4" and 6" lift kits fit these models, although an additional part number is required if you are retaining the factory front struts (see Accessories). The additional components are not required with SS Bilstein applications.
NOTE: The TRX4/Outdoorsman factory ride height is approximately 1" taller than the standard Ram, so you will gain 1" less lift than stated. When lifted, the standard Ram 1500 and the TRX4/Outdoorsman ride height is the same.
ReadyLift - Dodge 2500 level kit
DODGE RAM 2500 ReadyLIFT 6" LIFT KIT W/ BILSTEIN SHOCKS 2014-2018
Recently Viewed Items